Results 1 to 15 of 511

Thread: Corvette CCM Reverse Engineering Anyone?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    Fuel Injected! spfautsch's Avatar
    Join Date
    Apr 2015
    Location
    Montgomery City, MO
    Age
    53
    Posts
    883
    Quote Originally Posted by steveo View Post
    i read that in a book written on the 68hc11 called the technicians guide to the 68hc11
    I would consider that bad info then. I've never heard of anything called a fuse map - the fuses he's speaking of are the actual floating gate transistors that make up the bits.

    Thanks for posting the connector legend NomakeWan. To further elaborate, the gray connector is C and D, and the green is E and F - it doesn't really stand out on the legend.

    steveo you only need one wire on any of the pins for battery, ground and serial - they're connected together internally. I think you can get by with only applying switched 12v on E4 also. The passkey resistor that was taped to the case goes between E12 and F5.

Similar Threads

  1. car bogs down when switching into reverse/D
    By CAMMED LT1 in forum GM EFI Systems
    Replies: 4
    Last Post: 09-27-2021, 12:34 AM
  2. 12212156 code reverse engineering project in Ghidra
    By dzidaV8 in forum OBDII Tuning
    Replies: 8
    Last Post: 01-13-2020, 11:04 AM
  3. Help!! 93 Lt1 6M Reverse lockout
    By noeysuarez in forum GM EFI Systems
    Replies: 3
    Last Post: 09-14-2017, 08:17 AM
  4. 4l60e reverse boost valve location and procedure
    By JTodd in forum Introductions
    Replies: 1
    Last Post: 04-19-2013, 01:20 AM
  5. T56 reverse lockout options with TBI PCM
    By CDeeZ in forum GM EFI Systems
    Replies: 1
    Last Post: 02-26-2013, 05:06 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •