The FSM specifies that E5 / IGN1 is hot in start and run, and that E4 / IGN3 is hot in run only. This implies E4 is not hot in start / cranking but I haven't tested in-car to verify.
Edit: On my test bench setup I was able to connect with eehack and / or read with flashhack with either E4 or E5 connected with a 1333 and 8051 PCM. Though I wasn't paying any attention to the CCM broadcast / polling traffic and responses.
Dammit, for some reason I'm not getting email notifications on new posts.
Steveo I'm too lazy to lookup calids - what year / type bin do you have on the PCM?
Bookmarks