Originally Posted by
NomakeWan
What is an F0 mode? An undocumented feature of the CCM?
That's the tester announcing it's bus master? May not be needed since wasn't used for the log I made two days ago.
Originally Posted by
NomakeWan
Also why is your logger attempting to send a Mode 8 request before the CCM sends an F0 external device poll?
That was me doing a stupid in the message pump "logic".
steveo you must not have had enough tequila when you were testing the mode 7 stuff. Works just as expected for me with ccm silenced.
Code:
138337[F4 57 01 00 B4]
F4 92 01 00 00 00 00 00 00 00 00 7C 3E 00 04 06 40 00 02 2F 0B C5 0D 4C 27 5E 83 4D 28 20 4F 19 00 8F F1 DC D8 65 A8 10 86 88 80 80 00 A0 00 A4 05 8A 00 38 14 1A 00 04 CD FF 00 00 00 00 6B 43
138434[F1 57 07 10 A1]
10 59 00 5E 27 00 12
138452[F1 57 07 40 71]
40 57 FF FF 6B
41 67 27 51 00 5E 4D 01 04 05 DC BF E3 00 3F FF FF 00 FF FF 72
138497138499[F1 56 F0 C9]
F4 57 01 00 B4
138509[F4 57 01 00 B4]
F4 92 01 00 00 00 00 00 00 00 00 7C 3E 00 04 06 40 00 02 57 0B 8E 0D 4C 28 5E 83 4D 28 20 53 19 00 8F F1 DE D8 65 A9 10 86 88 80 80 00 A2 00 A5 05 85 00 38 14 19 00 04 CD FF 00 00 00 00 6C 4C
Gauges were updating and average fuel consumption started dropping while it was idling so I think this will work great. Just need to fine tune things and make it handle when the PCM shuts down gracefully, loss of sync, etc.
Bookmarks