Thanks for responding. I'm not sure what OS, the ecu is still in the car. I picked up a spare from auto wrecker, same car (99 Camaro a4) but the spare is from a v6. Apparently it's different, it is blue & clear connectors. I can post the read file from z28
If you can see what it says. Depending on the xdf i use the fields/tables are blanc or zeros.
I'd be fine with that. I want to get a second ecu to experiment with, leaving the original one unaltered. I know of an ECU in the wrecker for an s10 truck that I believe has red and blue connectors. Would that be a good candidate for an experimental ecu? Thanks for your assistance!!@
Just an update, picked up an ecu from 2002 Blazer, red & blue connectors, read with LS Droid, os 1221215 last number could be a 5 or 6, didn't fit in the little window on ls droid. Hardware number is 09386530, Serv number is 12200411. Hopefully there is an xdf for this unit. I believe I've seen 0411 mentioned previously on the forum. Thanks again.
Check out this this gearhead thread for an XDF
http://www.gearhead-efi.com/Fuel-Inj...S-12212156-xdf
Aso check out
www.universalpatcher.net/
it's a relitivly new tool for this generation pcm's
No need to re-invent the wheel. But we can make it better
That's great, thank you.
Bookmarks