Manual or auto OS

[blakebird93]

So its possible to segment swap to a non electric auto so it only uses the pnp switch?

[ralmo94]

So its possible to segment swap to a non electric auto so it only uses the pnp switch?

That's what the bin in the thread I referenced was for.
If you have a bin with the proper engine for the same OS as the non electric auto bin, you can segment swap.
Both bins need the same os to segment swap

[ralmo94]

Just remembered you said you had access to bins from work, if you can find something like a Kodiac or Topkick truck bin that had an AT545 ALLISON, AND RAN 2156OS you would be in business. Although the post in the thread I referenced said they only came in those 2 OS's

[blakebird93]

I think at this point itll be less effort to go manual file and tune accordingly. Converter is a little on the loose side so im sure itll be tunable

[ralmo94]

I think at this point itll be less effort to go manual file and tune accordingly. Converter is a little on the loose side so im sure itll be tunable

Only issue I remember reading about doing that, is some report stalling issues when slowing to a stop.
But you said you raised your idle, so you might not have any issues, if you do, you could always modify dfco, and rolling idle
I agree that is probably the easiest way forward. Let us know how it works out for you

[blakebird93]

I have a buddy who tunes these cars after the swaps and he said turns off the follower so it doesnt try to stall and they work fine.