You should have no problem, if you can post your stock bin file up.
Vats disable is pretty easy as long as you have the correct definition file.
No prob about delay, I work for a living also. Lol
What transmission are you using?
You should have no problem, if you can post your stock bin file up.
Vats disable is pretty easy as long as you have the correct definition file.
No prob about delay, I work for a living also. Lol
What transmission are you using?
No need to re-invent the wheel. But we can make it better
IM USING A 700R4
I WAS LOOKING AT THE FILE AND IT SEEMS ITS FOR A V6 ATLEST IT SAYS V6 ON TOP..IM RUNNING A 5.3
sorry just realize my caps was on lol
If you are talking about the xdf I linked, it's version 6.Originally Posted by apborione
No need to re-invent the wheel. But we can make it better
ohh ok kool.i tell you im new to all of this..now ihave to figure out how to export to thde pcm
was looking at your bin.
I can confirm you are 2156 OS, but the 8th letter of the vin is V which means LR4 4.8. Did you get the pcm with the engine?
Are you sure its a 5.3 and not the 4.8? They look the same on the outside.
Also looks like this tune was setup for auto electronic transmission. would be better to start with a different bin for a 700R4
No need to re-invent the wheel. But we can make it better
the PCM was separate..on the transmission i can just put it as manual but the file you sent cant be edited seems password protected
Reply With Quote
Bookmarks