Quote Originally Posted by kur4o View Post
It looks like a bug. Can you share the exact steps you are doing[from opening the looger -till the point of error].

Just in case the sequence can be
settings->configure device->connect
profile tab->select some test pids for logging->start logging button[top left]
log tab-> the pids should update now if all is good.
followed the 3 steps above, this is the log.

Reading Platform config: p01-p59-platform.xml [OK]
Loading file: p01-p59.xml [OK]
Not connected - adding pids without testing compatibility
Connecting (VPW)...
Device Found: OBDX Pro VT
Device Successfully Initialized and Ready
Writing to logfile: C:\Users\fran\Patcher\Logger\Log\log-2022-05-05-18-34.33.csv
Unable to transmit, Error: 6C FE F0 20
Unable to set bus quiet
Reading Platform config: p01-p59-platform.xml [OK]
Loading file: p01-p59.xml [OK]
No profile configured
Engine Load: 0 %
Writing to logfile: C:\Users\fran\Patcher\Logger\Log\log-2022-05-05-18-35.20.csv
Pid setup...
Requesting pids...
Logging started
Stopping, wait...
Logging stopped
Writing to logfile: C:\Users\fran\Patcher\Logger\Log\log-2022-05-05-18-35.49.csv
Pid setup...
Requesting pids...
Logging started
Unable to transmit, Error: 6C 10 F0 22 00 06 01
Long Term FT Left Bank: 17.96875 %
Unable to transmit, Error: 6C 10 F0 22 00 0B 01
Stopping, wait...
Logging stopped
Unable to transmit, Error: 6C FE F0 20
Unable to set bus quiet
Writing to logfile: C:\Users\fran\Patcher\Logger\Log\log-2022-05-05-18-36.59.csv
Unable to transmit, Error: 8C FE F0 20
No respond to Query devices message
Connecting (VPW)...
Device Found: OBDX Pro VT
Device Successfully Initialized and Ready
Writing to logfile: C:\Users\fran\Patcher\Logger\Log\log-2022-05-05-18-37.29.csv
Unable to transmit, Error: 6C FE F0 20
Unable to set bus quiet
Writing to logfile: C:\Users\fran\Patcher\Logger\Log\log-2022-05-05-18-37.43.csv
Pid setup...
Requesting pids...
Logging started
Unable to transmit, Error: 6C 10 F0 22 00 0C 01
Unable to transmit, Error: 6C 10 F0 22 00 04 01
Unable to transmit, Error: 6C 10 F0 22 00 0B 01
Stopping, wait...
Logging stopped
Unable to transmit, odd response from device: 6C FE F0 20
Unable to set bus quiet
Unable to transmit, odd response from device: 6C FE F0 20
Unable to set bus quiet
Writing to logfile: C:\Users\fran\Patcher\Logger\Log\log-2022-05-05-18-39.36.csv
Unable to transmit, Error: 6C FE F0 20
Unable to set bus quiet
Fueling Mode: 2 Raw
Writing to logfile: C:\Users\fran\Patcher\Logger\Log\log-2022-05-05-18-40.39.csv
Unable to transmit, Error: 6C FE F0 20
Unable to set bus quiet
IAT Sensor: 50 °C
Writing to logfile: C:\Users\fran\Patcher\Logger\Log\log-2022-05-05-18-40.57.csv
Pid setup...
Unable to transmit, Error: 6C 10 F0 22 00 0F 01
Requesting pids...
Error, CreateNextSlotRequestMessage line 437: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
Error, CreateNextSlotRequestMessage line 437: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
Logging started