Adding EGR?

[Kitch]

It's an HPTuner .hpt file, can you work with that or were you wanting a .bin file?

[Pulse_GTO]

It's an HPTuner .hpt file, can you work with that or were you wanting a .bin file?

A bin file might be easier, but I'll still take a look at it in HPT.

[Kitch]

I've added the .hpt file, see what you can find.

[Pulse_GTO]

I've added the .hpt file, see what you can find.

Here is your file with the EGR and AIR turned on. I used values I found from an 01 5.3 Tahoe and from the 02 Express 2500 5.3 file. The HPT file you sent me had the EGR Enable switch disabled. That is parameter 210 in HPT software. You need to use the Navigator and search for EGR to find the parameters, at least they were still available in version 4.4.4.

I'm also uploading the same file in bin format along with the matching xdf if anyone sees something I may have misses.

Let us know if this works!

[Kitch]

Thanks for taking the time to have a look at it, much appreciated.
Sorry, I should have pointed out the file I uploaded was the original one from BP Automotive and it came with the EGR & AIR disabled and the EGR DTC's off.
I enabled the EGR and the DTC's to match the original file read from my 01 Tahoe, flashed it back to the PCM but data logging while on the motorway was still showing EGR not working.

Thanks for converting it to a .bin format and adding the .xdf.
This my seem like a simple question but can you actually use TunerPro RT to view OBDII .bin files?

[Pulse_GTO]

Thanks for taking the time to have a look at it, much appreciated.
Sorry, I should have pointed out the file I uploaded was the original one from BP Automotive and it came with the EGR & AIR disabled and the EGR DTC's off.
I enabled the EGR and the DTC's to match the original file read from my 01 Tahoe, flashed it back to the PCM but data logging while on the motorway was still showing EGR not working.

Thanks for converting it to a .bin format and adding the .xdf.
This my seem like a simple question but can you actually use TunerPro RT to view OBDII .bin files?

Yes. First copy the attached checksum plugin to the TunerPro "Plugins" folder. Then open TunerPro, open the file and the XDF and you are good to go.

If you have HPT, just use the VCM Scanner to see if the monitors show up.

[ZBrink]

Here is your file with the EGR and AIR turned on. I used values I found from an 01 5.3 Tahoe and from the 02 Express 2500 5.3 file. The HPT file you sent me had the EGR Enable switch disabled. That is parameter 210 in HPT software. You need to use the Navigator and search for EGR to find the parameters, at least they were still available in version 4.4.4.

I'm also uploading the same file in bin format along with the matching xdf if anyone sees something I may have misses.

Let us know if this works!

Hello! I have a 2000 Yukon 5.3 LM7 4x4 4L60E. I can pull my BIN with PCHammer but I don't know how to create an XDF for it. I need to 1) delete EGR as I added shorty headers and 2) Add dual electric fans. Can you assist me with this? I cannot find a write up or video anywhere.

[ZBrink]

Here is your file with the EGR and AIR turned on. I used values I found from an 01 5.3 Tahoe and from the 02 Express 2500 5.3 file. The HPT file you sent me had the EGR Enable switch disabled. That is parameter 210 in HPT software. You need to use the Navigator and search for EGR to find the parameters, at least they were still available in version 4.4.4.

I'm also uploading the same file in bin format along with the matching xdf if anyone sees something I may have misses.

Let us know if this works!

Hi there, may I have the matching BIN and XDF files you created but with the EGR still disabled? I see Op originally gave you the HPT file but I need it for use in TunerPro.