SCARED OF EBL P4 SETTINGS, READY TO INSTALL.

[badgta]

Right now she is doing pretty good rob, so i figure a copy/paste of the VE tables i currently have should do it... I actually have a new bin ready that i smoothed up from what the current one is.. See attached photo of factory VE graph vs new smoothed for final burn..

I was just scared man, so many options, etc.. I look forward to putting the ebl in and buttoning it up, i ran the channel 1 white wire for WB feed with a weather pack connector so it looks factory and can be unplugged just like everything else. I go all out with my stuff..

Also, where can a fella get a spare connect cable?!? The one with the headphone jack? Cause i have (NEVER) had much luck with those and want to have a spare if needed.

Thanks!


Adam

[RBob]

Also, where can a fella get a spare connect cable?!? The one with the headphone jack? Cause i have (NEVER) had much luck with those and want to have a spare if needed.

Thanks!

Adam

The 3-wire pigtail that goes into the ECM connectors? We sell them at $5 plus shipping. The mini-plug to USB cable is $25, and is an off-the-shelf FTDI product. Their part number is on the USB end.

Nothing special about the pigtail cable. Standard stereo audio jack, wires, heat shrink and the three terminals.

RBob.