Quote Originally Posted by spfautsch View Post
Haven't been getting email notifications again - and I'm completely lost here is C41 / C81 a dtc or ???

Anyway, I finally had some time to work on modding my logger so it will write all ALDL data to the sd card. That's now working so I should be able to capture the initial interaction between the PCM / CCM very easily with VATS enabled / disabled in the CCM, and with / without the correct PASSKey resistor. But now I'm remembering how rough my code example was where I left it. There's a lot of cleaning up, general stupidity mitigation, and function modularizing needing done. Ugh.
Would be more than willing to try out this when you get it further along. I am running out of driving time, weather getting crappy. I am also working on my Display and going to try an read messages off the bus (first going to start with the Simulator on my test bench. I just need to get a level shifter for the DUE..