Originally Posted by
steveo
depending what ECM you have and how much disassembly has been done on it, the best way would be to hack it and then you could query the output of calculated airflow.
but if you can't do that, you have map, IAT, and RPM, so you're most of the way there. i guess the issue is the VE lookup value doesn't have a PID, right?
two options to get VE lookup really
- hack it (see above)
- copy your ve table to somewhere on your computer and do a lookup yourself
starting to sound like either way will require writing some code
this all sounds kind of annoying, most people just disable p0101 don't they
Bookmarks