been messing with P59 stuff lately and am confused about the VTD
vtd_issue_001.jpg
this is a bin with OS 12593058. I disabled VATS (set to 2) using tunerpro and version 1.1 of the XDF that is available on pcm hacking.
Then, when i open the bin with universal patcher, it is unclear to me if vats is successfully disabled or not.
The drop down menu for "VTD_Configuration" offers two choices, "0:Class2_VTD" and "1:None_VTD". But the text in the bottom right reads:
"VTD_Configuration
This is used to activate the different VTD functionalities within the PCM., Units: Unitless
Controls whether or not a vehicle theft deterrent system is present, and if the fuel will be cut off when the proper parameters are not met to allow the vehicle to start. 0 = VTD signal revieved via class 2 comm., 1 = VTD signal recieved via pulsewidth modulated signal, 2 = No VTD present.
Current value: 2 (Out of range) [02] [ Min: 0 Max: 1] "
If i set the value to 1, tunerpro with that XDF shows 1, however it has 1 as VTD via PWM, and 2 as the appropriate value for NONE (similar to P01).
Comments or suggestions?
Thanks
Bookmarks