After reading your response and rereading my question i don't think i asked the correct question. What if I spliced in to the signal wire between the sending unit and the ECU?
After reading your response and rereading my question i don't think i asked the correct question. What if I spliced in to the signal wire between the sending unit and the ECU?
Hiya,
It's a thermistor. If you tap into it, you will change the input to anything it is hooked to. Quick answer is no, you cannot use it to feed two receivers. Very few data acquisition systems will have a million to 1 input as to not skew the other intended output/input.
p.s. If you need to add an aftermarket gauge there are quite a few options including some that you can cut and put into the upper radiator hose. There is the plug at the rear of the passenger head. That can be removed and use an adapter like this one. https://www.autometer.com/ls-install-kit.html
Last edited by In-Tech; 02-23-2023 at 10:29 PM.
-Carl
Thank you all for your input. I think I have found the work around, adding a second old school type sensor at the rear of the right head for the old style gauge.
Bookmarks