383 hot cam

[PlayingWithTBI]

Help! Need a good place to start on this 383. 10:1 230° @ .050" lunati cam, 2.02 heads stock tbi manifold and t-body. Just need to have idle on it's own then go from there. Set iac 255. Adjust timing back and forth. Still loads up. Even with e adjustments. Thanks.

I'm gonna watch this thread - I have a Blue Print 377 (4.000" X 3.75") with a Comp Cams XR282HR (230/236 @0.050") short block we just dropped in my 88. Hopefully we'll get her running next weekend. My Edelbrock 3704 intake was bored to 48mm with the TB bored to 46mm. Previously I was running 20 PSI with 61Lb/Hr injectors. I was thinking I may have to go with bigger ones.

One question and I'll get out of the way
What do you mean by "loads up"?

Good luck with your project