Quote Originally Posted by dave w View Post
4.3 TBI injectors typically flow 45 Lb/Hr @ 12 ~ 13 PSI
4.3 TBI Injectors will theoretically flow 53 Lb/Hr @ 18 PSI

5.7 TBI Injectors typically flow 61 Lb/Hr @ 12 ~ 13 PSI
5.7 TBI injectors will theoretically flow 72 Lb/Hr @ 18 PSI
Right, and 72 is what I had started with, before I started to max out my fuel tables and was told to lower flow rate in the bin to get more room to work with. That's how I ended up at 59. I just made some bins to do spike test for you to see. Will upload logs when I'm done.

I still think the WBO2 in the logs aren't correct though.
https://www.aemelectronics.com/sites...or%20Gauge.pdf
This is the gauge I'm using. I have white wire to pin B16, and brown wire spliced into B3. At first, I had brown spliced into A12 and it acted the same way.