Hi, would it be possible to have someone email me a good 088 xdf file? I am struggling with checksum failures and not sure if it is the XDF file I am trying to use.
EDIT figured it out, had the checksum plugin in the wrong location.
Hi, would it be possible to have someone email me a good 088 xdf file? I am struggling with checksum failures and not sure if it is the XDF file I am trying to use.
EDIT figured it out, had the checksum plugin in the wrong location.
Last edited by drptop70ss; 09-11-2021 at 05:00 PM.
Hey, if I used this XDF without moving the plug-in properly at first, will it ruin the file? I realized my mistake and moved the plug-in into the tunerpro folder, and then continued. When I load my file into PCMHammer it shows all checksums being good, should I also download efi live or something to double check?
I have a 1999 Silverado 4x4 1500 5.3l LM7, with the shitty 4896 PCM, I’m upgrading the OS to the 12212156 OS, doing efan swap, enabling both battery terminals to try and use the GCBM from my 06, and swapped the ac pressure sensor in place of the pressure switch. I’m fairly new to this, but have spent the past several months Obsessively trying to learn/read every drop of info I can find on tuning and changing OS. I don’t want to brick my PCM, as the only other PCM I have is a blue green
EDIT- I should also mention I’ve purchased an OBDX pro GT GM device to flash this bin onto my pcm
Last edited by Escalado; 10-09-2023 at 11:33 PM. Reason: Fixed typos and deleted most of the quoted paragraph to shorten comment size
pcmhammers checksum tests are enough, if it says its ok, its ok.
In case anyone was curious, the lean code was due to the 1999 fuel injectors being only 19.8lb/hr, but the 12212156 OS being cal’d for 25lb/hr. I swapped in my parts trucks good condition injectors, and Voila! No more code! Now I’m about to start dialing in the tune, I’ve read hundreds of articles about tuning over the past 9 months, I think I’m ready to start! Anyone have any tips/tricks for tuning using tunerpro RT?
ALSO, if anyone has an ADX/ADS file for data logging in tunerpro with the 12212156 they can send me, I’d much appreciate it!
Needing this OS version XDF with the added fields mentioned (the version on BM Github is missing the AC type field/option), but don't see the file attached like in other posts. Am I missing something? Was it removed?
Any help on a very old thread would be appreciated.
Bookmarks