Looking for injector compensations for 1996 Grand Sport Corvette

[2xls1]

When opening the LT4 bin I have listed here in TC what does it show?

This is what it shows with TC OBD1 using EE. TC OBD2 won't open it.

[bhr]

This is what it shows with TC OBD1 using EE. TC OBD2 won't open it.

Are you able to see the fuel injector info? Is it the same as what I or you already posted above also what are you using from tunercats there "tuner" software? and what should I use to open the .cal file

http://www.tunercat.com/tnr_desc/sw_dwnload.html

[2xls1]

Are you able to see the fuel injector info? Is it the same as what I or you already posted above also what are you using from tunercats there "tuner" software? and what should I use to open the .cal file

http://www.tunercat.com/tnr_desc/sw_dwnload.html

Since the VIN in your bin IDs as a Grand Sport and it has 27lb as the IFR the other data is probably correct for those injectors. TC OBD2 uses .cal files. it will open a bin but will only save as a .cal. You would have had to of purchased it years ago as it is no longer for sale. Everything on that page for OBD2 are just updates if you have the original install. I just happen to have both versions of TC. What I originally posted is from the OBD2 96 Grand Sport file.

[2xls1]

Tables from your file in TC OBD1.

[bhr]

Thank you! yes I dont have TC, any idea why the injector data from my bin is different than your initial? look at the low pulse width table the offsets are the same was this just a error in your original post

inj2.jpg
LT4 1.jpg

[2xls1]

Thank you! yes I dont have TC, any idea why the injector data from my bin is different than your initial? look at the low pulse width table the offsets are the same was this just a error in your original post

inj2.jpg
LT4 1.jpg

I don't know other than I wouldn't try compare an OBD1 file with an OBD2 file. The OBD2 cal file Dave posted has the exact same data that my file has. I'm still puzzled why there are both OBD1 and ODB2 Grand Sports in the same model year.

[bhr]

Are you able to check 92-95 LT1 24lbs fuel injector info with TC? Im getting these two for 94-95 LT1, using DA2 and DA3 masks I dont get pulse width values

Screenshot (2628).jpg
Screenshot (2629).jpg

here are some bins

[2xls1]

I'm not going to look through 6 files. Pick one and I'll see what it shows.

[bhr]

Possibly post the original .bin that’s going to be used? I think it’s a good plan to be on the sheet of music

Im only using the injectors from a 1996 LT4 vette they are different from the LT1 vette Im tuning a bin with $8D xdf