DIY LTCC or similar system for LT1s

[Tom B.]

The delteq wasn't bricking the pcm's. I'm still not sure what was doing it. It didn't matter if they were installed in the car or on the bench. I checked and double checked my hardware and software. I had 3 of them repaired prior to the last bricking episodes. I would replace the chips myself if I knew where to buy the chips and how to do the initial flashing. I would really like to convert one to be an emulator for real time tuning.

[Aroberson77]

The delteq wasn't bricking the pcm's. I'm still not sure what was doing it. It didn't matter if they were installed in the car or on the bench. I checked and double checked my hardware and software. I had 3 of them repaired prior to the last bricking episodes. I would replace the chips myself if I knew where to buy the chips and how to do the initial flashing. I would really like to convert one to be an emulator for real time tuning.

http://www.goldsswagon.com/PCMFlash/...lashMemory.htm Have you seen this before?

getting back on topic, assuming we decode the opti signals successfully, what other true/false statements can be used to tell the demultiplexer which coil to fire? I don't think the stock PCM has any signal outputs for this since it uses a cap and rotor arrangement