Thank you!!! Also would it be possible to get these XDFs complied into a ZIP file?
*Edit* Would these XDFs work with a 4896 ECU? Its pretty much the same as a 0411
Thank you!!! Also would it be possible to get these XDFs complied into a ZIP file?
*Edit* Would these XDFs work with a 4896 ECU? Its pretty much the same as a 0411
Last edited by brandonwh64; 01-17-2019 at 02:57 AM.
....
Last edited by LRT; 05-24-2021 at 11:05 PM.
Hi guys - I`m cross posting from the corvette forum here.
I ordered the AllPro USB ELM327 adaptor and have been able to read my BIN file successfully, 01Z06 with mods and a tune. Great! I think, going via the other thread that I can also write the cal changes I want, even better.
However the final piece needed is data logging. Can anyone help? I found a few LS1 tagged ADX files but none of them get anything in TunerPro from my car.
I set tunerpro to use plug-in, set plug-in to ELM327OBDII interface.
1 of the ADX files lets me connect ok but rate is ~1Hz and i'm not getting any channels coming back. 2 of the ADX files let me connect but with rolling errors and no data. The other files don't even get me connected....
The built in plugin, as far as i can tell doesnt do anything. I use scalxl pro at this stage as ive had a license for it for years. But I do have a working elm327 adx, but a quick test this morning shows it needs some fixes to work on the allpro. If you want to help and understand the elm protocol and adx authorship i'll send it, else give me a few days and i'll see if i can get it going and release it.
Hi LRT thanks for the amazing work. My question is, as I am trying to enable data tracing using tuner pro, are your xdf files already set up to work with an adx file? I only ask as the guide I have tried to use mentions having to edit the xdf to suit the tracing and yours are password protected so don't allow the option to do so. Or if I am barking up the wrong tree just go ahead and slap me down. I am a noob to all this tuning stuff. Cheers.
Did you ever get an XDF file to work with your 09354896 ECU?
No, i updated my pcm to an OS with an available xdf file and now all is working fine
Bookmarks