Quote Originally Posted by dave w View Post
I wonder about the IAC controls? I'm thinking only one ECM needs to control the IAC.

I wonder about reference voltages, like the 5 volts to the TPS. I wonder what each computer sees for a TPS voltage when the ECM's are tied together?

Do you plan to bench test this setup?

For the bench testing I've done with a 7747, I use an electric drill for spinning the distributor to send a reference pulse to the ECM. When bench testing, I use TunerPro RT to data log so I can play-back the test.


dave w
Dave I have the same thoughts about the IAC receiving conflicting instructions from both ECMs, I just hadn't made any decisions. I thought possibly about having separate IAC pigtails coming out of the harness at the IAC. I think bench testing will be a good think to do.