8.1/Allison 2156 Bin needed

[ArizonaMetal]

hey CGW, i have two 8.1 tunes, neither is stock and both have been switched from allison to 4l80e, hope this helps,

Could you share the bins with the Allison trans?

[2xls1]

Could you share the bins with the Allison trans?

Tunercat doesn't read the separate Allison TCM. That is why the TC .cals show as 4L80s.

[ArizonaMetal]

Tunercat doesn't read the separate Allison TCM. That is why the TC .cals show as 4L80s.

I see
im new to ecm programming.
I have a 2004 GM ecm from an 8.1 with the Allison trans
i need to remove VATS and all smog related components.
I have the blue ECM connector with small power supply and Bluetooth OBDII
If you wouldn’t mind sharing your knowledge on how to remove
THE VATS As well as other smog related options.
A vehicle that we’re building.
I have an Apple phone and android phone as well as the laptop with windows so
I have plenty of options there .
I appreciate your help. Thank you so very much.

[2xls1]

I see
im new to ecm programming.
I have a 2004 GM ecm from an 8.1 with the Allison trans
i need to remove VATS and all smog related components.
I have the blue ECM connector with small power supply and Bluetooth OBDII
If you wouldn’t mind sharing your knowledge on how to remove
THE VATS As well as other smog related options.
A vehicle that we’re building.
I have an Apple phone and android phone as well as the laptop with windows so
I have plenty of options there .
I appreciate your help. Thank you so very much.

I'm probably not the best person to help with DIY programming as I mainly use commercial products like Tunercat and HP Tuners. There are others here more proficient with things like PCM Hammer. Do you have a cable that works with that? I also have that but rarely use it because like I said I have the other programmers. HP Tuners does read the Allison TCM when you use it.