Thanks for the replies. Just working on the plan right now so being temporarily out of stock isn't a concern.
I was hopeful I could use a 411 PCM but I suppose that isn't an option?
Thanks for the replies. Just working on the plan right now so being temporarily out of stock isn't a concern.
I was hopeful I could use a 411 PCM but I suppose that isn't an option?
Last edited by WTO; 12-28-2022 at 07:57 PM.
According to the "WEB", the '0411 can be configured to run with 4x CKP only / without CMP. According to the "WEB" the '0411 with 4x CKP only configuration is "Batch Fire". Typically, TBI injectors are low impedance. Typically, '0411 injectors are high impedance. Perhaps an '0411 TBI configuration is an Ohms Law challenge?
Too much deviation from a factory engineered system for me. I'll get in contact with Dynamic and decide if that's the route, or just work with someone on burning a PROM for my configuration. Outside of the 411 being flash able I was looking to not have to mount the ECM in the cab.
Bookmarks