TBI on scout II- Please help!

[dave w]

Thanks for this info. I looked through my parameters and I don't see anything with lists, or a VE table for off throttle. I only have VE as a %. Do I need to be hooked up to the truck to see that info? My distributor is an IH holley, with a duraspark conversion. Basically, a small cap HEI... I definitely want the ECM to control timing...

The Near Idle / Off Idle tables are for TBI computer 16197427, the 1227747 is similar but with one fuel table and one spark table. Similar looking spreadsheets can be made for the 1227747, http://gearhead-efi.com/Fuel-Injecti...Information-42 post #7.

Is the Holley / Duraspark distributor using the GM 8 pin ignition module? http://3.bp.blogspot.com/-Huj3_ztl5U...7+ignition.jpg

dave w

[BigRigg]

The Near Idle / Off Idle tables are for TBI computer 16197427, the 1227747 is similar but with one fuel table and one spark table. Similar looking spreadsheets can be made for the 1227747, http://gearhead-efi.com/Fuel-Injecti...Information-42 post #7.

Is the Holley / Duraspark distributor using the GM 8 pin ignition module? http://3.bp.blogspot.com/-Huj3_ztl5U...7+ignition.jpg

dave w

Yeah, I have downloaded post 7 in that thread. I imagine it is something similar to the ALDLTOBIN program? Yes, that is the conversion I did with my distributor.