new $EE tuning thing!

[fbody_Brian]

one other thing, a kind eehack user is donating a wideband, so new wideband analyzer features etc will surely be in the works...

already digging the wideband analysis. Question, is it by design that the wideband analysis rounds to the nearest whole number? I'm analyzing open loop cruising with the wideband.

also
I have a feature request. It would be helpful to have a Time (sec) display on the main tab somewhere. it would be useful when trying to move to a specific location. I can see the time on the graph, and would like to be able to go to the same area on the main tab.

[steveo]

also
I have a feature request. It would be helpful to have a Time (sec) display on the main tab somewhere. it would be useful when trying to move to a specific location. I can see the time on the graph, and would like to be able to go to the same area on the main tab.

a damn good point and very easily done. just have to make room for such a control. nearly every pixel on that tab is either used, or i have a plan for it

edit: you should also know that clicking anywhere on a graph will move you to the closest available record; there's just no cursor on the graphs so you don't realize it's happening...

[steveo]

already digging the wideband analysis. Question, is it by design that the wideband analysis rounds to the nearest whole number? I'm analyzing open loop cruising with the wideband.

no, it isn't.. damn, it was working fine. i'll fix that today.

[steveo]

i fixed it, and i added the timestamp display just as icing on the cake. thanks for the feedback.

3.5.1 available here: http://fbodytech.com/eehack-2/download-eehack/

[steveo]

RAM:0360 word_360:       rmb 2                   ; DATA XREF: sub_9F91:loc_9FA5r
RAM:0360                                         ; SPI_chatter_failed_defaults+Fw ...
RAM:0360                                         ; ALDL mode 4
RAM:0362 byte_362:       rmb 1                   ; DATA XREF: sub_9FBA:loc_9FCEr
RAM:0362                                         ; SPI_chatter_failed_defaults+12w ...
RAM:0362                                         ; ALDL mode 4 stuff
RAM:0362                                         ; b0 set causes m4 value to be subtractive
RAM:0362                                         ; b1 clear makes the m4 value a total value
RAM:0362                                         ; b2 is required to be set to allow any mod
RAM:0362                                         ; b3 will reset BLM cells
RAM:0363 byte_363:       rmb 1                   ; DATA XREF: sub_9FBA+19r
RAM:0363                                         ; ALDL mode 4
RAM:0363                                         ; b1 and b2 set uses 364 as cylinders to disable
RAM:0363                                         ; b2 set, b1 clear uses 364 as target AFR
RAM:0363                                         ; b3 set causes choke fueling to be disabled immediately
RAM:0364 byte_364:       rmb 1                   ; DATA XREF: sub_A594+A9Fr
RAM:0364                                         ; SPI_chatter_failed_defaults+15w ...
RAM:0364                                         ; ALDL mode 4
RAM:0364                                         ; mode 4 commanded target AFR
RAM:0364                                         ; or disabled cylinders
RAM:0365 byte_365:       rmb 1                   ; DATA XREF: sub_D4A5+7Ar
RAM:0365                                         ; sub_D4A5:loc_D526r
RAM:0365                                         ; ALDL mode 4
RAM:0365                                         ; mode 4 commanded spark change(or total)
RAM:0366 byte_366:       rmb 1                   ; DATA XREF: sub_A057+52r
RAM:0366                                         ; sub_B76E+74w
RAM:0366                                         ; ALDL mode 4
RAM:0366                                         ; duty cycle for ???(106C)
RAM:0367 byte_367:       rmb 1                   ; DATA XREF: sub_ECEE:loc_ED56w
RAM:0367                                         ; sub_ECEE:loc_ED69r ...
RAM:0367                                         ; 8885 stored here, gets counted down
RAM:0368 byte_368:       rmb 1                   ; DATA XREF: sub_E26Cr
RAM:0368                                         ; buffer overflow test byte
RAM:0369                 rmb 1                   ; bottom of stack

v6 mode4 stuff for reference. so it does have commanded spark, afr, and cyl cut. awesome.

so what 'bout idle target?

im going to pull your adx and have a look too. at least if i can get V6 commanded spark to work with my autospark table thing it'll be super useful for V6 tuning.

[RobertISaar]

some example target idle commands are in the ADX.

[steveo]

Please help me test this gigantic spread of new features...especially the flash stuff, if you're willing to take the risk... and to make sure the automatic transmission parameters are displayed accurately! (the analyzer will use them soon)

I recommend disabling the "Optimizer" on the flash page if you do not have a socketed ecm.

I bet most of the features work, but my car is out of commission for the moment, so I can't really test.

This is a big release, the highlight is really the fact that it patches the flashed bin in-stream, then does versioning requests to the ecm via a mode-3 request and enables some features.... the only real ones right now are target AFR and 'fast rate' datalogging..

Change list:

3.6:
Flash Write:
* Enable flash write optimizer, to make writes faster and less risky.
* Enable EEHack patch upload during flash! (Optional)
* Automatically disable optimizer and large block write in recovery mode
* Automatically remember last written bin (Auto-compare!)
* Add "Clear" function to compare bin
* Syntax hiliting in flash read/write routine status
Bin Patches:
* Patch 0x01: Add a new ALDL message for high rate logging
* Patch 0x01: Include AFR TARGET within both accelerated and normal ALDL messages
Serial port selection:
* Moved selector to "Config" tab
* Save selected port as a config option
* Automatically go to config tab on bad port selected
Knock Detection:
* Added knock warning, turns entire screen red for 200ms when knock occurs
* Added spark skew knock response, optionally removes 1 degree of spark when knock occurs
Add auto trans TCC, P/N, and current gear to main tab
Move "Tests" to "Extended" tab, no need for seperate tests tab.
** Enable logging rate accelerator option! (Requires patch)
** Enable Open Loop AFR target display (Requires patch)
"Notes" are now in a seperate (resizable) window
Prompt user on exit if there is unsaved log data or memos
Improve data parser per-function to increase synchronzation between elements