Looking for 2012 5.3 liter E38 Connector Pin Out

[S10LS]

This should be it.

[dave w]

This should be it.

Thank you!

I was able to get some Alldata schematics at my local library, but I could not find the connector pin outs.

dave w

[dave w]

Thank you!

I was able to get some Alldata schematics at my local library, but I could not find the connector pin outs.

dave w

The attached .pdf has the Alldata schematics I printed from my local library.

dave w

[brian617]

You get the info you needed Dave? Have ShopKey/Mitchell here if you still need.

[dave w]

You get the info you needed Dave? Have ShopKey/Mitchell here if you still need.

I think I'm doing OK. This weekend is when I get my hands dirty with the actual wiring. So far the wire colors and pin outs match the harness. I seem to favor the Mitchell Manual diagrams (before 2002 anyway), so it would awesome if you could post the Michell ECM diagram.

I'll post up more schematics I got today that should help someone wanting to set up a 2012 harness for stand alone.

dave w

[dave w]

More schematics.

dave w

[brian617]

Dave, I've tried to figure out a way to post those diagrams but it seems if ShopKey is protected from duplicating, or I'm just too stupid to figure it out lol. Sorry.