$32b definition file

[steveo]

the ads file i have contains open/closed loop, blm enable, airflow, cross counts, blm cell, knock count, rpm, coolant temp, throttle position... you have all those, right?

thing is, with a 160 baud datastream, that's about all you get without flashing a new chip. the adx cant make things magically appear in the datastream. the ecu only sends out what it's configured to send out, and the datastream has to be small or the sampling rate just gets worse and worse..

you want other info than what's provided? it can be done. you need to replace items in the bin's datastream configuration other known memory addresses, then modify your adx to match so things are converted and displayed properly.

do you want help doing that?

first you need to pick items you aren't using, and what to replace them with...

[ZEDRATED]

the ads file i have contains open/closed loop, blm enable, airflow, cross counts, blm cell, knock count, rpm, coolant temp, throttle position... you have all those, right?

thing is, with a 160 baud datastream, that's about all you get without flashing a new chip. the adx cant make things magically appear in the datastream. the ecu only sends out what it's configured to send out, and the datastream has to be small or the sampling rate just gets worse and worse..

you want other info than what's provided? it can be done. you need to replace items in the bin's datastream configuration other known memory addresses, then modify your adx to match so things are converted and displayed properly.

do you want help doing that?

first you need to pick items you aren't using, and what to replace them with...

can u post that file?
and is there anyway possible to get load while data logging? LV8 I believe it is called?

[ZEDRATED]

can u post that file?
and is there anyway possible to get load while data logging? LV8 I believe it is called?

Nobody has a good definition file for $32b????