I thought posting my replay to a PM on this thread would be helpful for 7747 tuning.
There are comments in TunerPro, use the F10 key to see the comments.
See screen shots of some VE Table comments for $42.
dave w
I thought posting my replay to a PM on this thread would be helpful for 7747 tuning.
There are comments in TunerPro, use the F10 key to see the comments.
See screen shots of some VE Table comments for $42.
dave w
My tcc isnt locking up, I have copied the settings from the AMUR 87 G-R-V Van 5.7TBI 700r4v1.0 vin to my vortec bin and tcc doesnt work in 3rd or OD like it did before the swap. i have adjusted the cable trying to loosen it up so it would allow OD and nothing... Can someone check the bin I have included see if I missed something for TCC?
Try the opposite copy / paste, move the modified fuel and spark tables into a known good TCC .bin.
There is also the compare function in TunerPro to verify the TCC parameters are the same between two .bin files. Load the compare .bin file, then from TunerPro Tools menu, use the Difference Tool.
dave w
Bookmarks