3.42 gears 245-35-20 wheels and I'll use the stock regulator for now
Marwoodjoseph@gmail.com
3.42 gears 245-35-20 wheels and I'll use the stock regulator for now
Marwoodjoseph@gmail.com
Thanks all for your help and I have no idea what all info was needed
As far as fans I have electric fans from a crystler 300
I'm curious on how you plan to write the file? what are you using to tune? and the 411 pcm that you have its from what? sounds like you asking for the complete work not just a base file for your setup.
Using ls-droid to read and write
The 411 is from the s10 I put the 5.3 into
Does that have the ability to write the entire operating system along with the calibration? I'll ask this one last time. Does your fuel rail have a vacc referenced regulator on it with a return line to the tank or is it a dead head rail with no return. And if you answer again with it's stock I'm through trying to help.
Last edited by 2xls1; 09-27-2019 at 06:15 AM.
It has a vac regulator with a return line
And I'm not sure about what all ls droid will allow me to do
If need be I'll buy a better option
I've spent the last 18 months working on this truck and have no clue about the computer side of it
OP check your mail.
Thank you much appreciated
Bookmarks